The oxygenation effect of the vacuum pump microporous aeration tube is significant. The following is a detailed analysis of its oxygenation effect:
1、 Principle and mechanism of oxygenation
The microporous aeration technology uses a Roots blower to press air into the gas pipeline, which is then sent into the microporous tube and dispersed into the water in the form of microbubbles. These tiny bubbles rise from bottom to top, promoting the full dissolution of oxygen into the water. They can also cause the rotation and up and down flow of water, bringing oxygen rich water from the upper layer of the pond into the lower layer, achieving uniform oxygenation of the pond water.
2、 Specific manifestations of oxygenation effect
1. Oxygenation: The tiny bubbles generated by microporous aeration float at the contact surface with water in the water, with low upward flow velocity, long contact time, and high mass transfer efficiency of oxygen. This causes a rapid increase in dissolved oxygen in the water, providing sufficient oxygen for aquatic organisms.
2. Stereoscopic oxygenation: Micro porous aeration can significantly increase the dissolved oxygen content in the bottom and middle layers of water, and bubbles can drive the bottom water to flow upward during the buoyancy process, achieving the exchange of upper and lower water bodies and achieving the effect of uniform oxygenation throughout the entire pool.
3. Improving water quality: Adequate dissolved oxygen can accelerate the decomposition of sediment, scattered and remaining feed, and fish excrement at the bottom of the water body, transforming them into microorganisms, restoring the self purification function of the water body, and building the natural environment of the water body. At the same time, microporous oxygenation can also bring harmful and toxic gases out of the water surface, thereby improving and stabilizing water quality.
3、 Comparison with traditional oxygenation methods
Compared with traditional oxygenation methods such as waterwheel, impeller, water jet, etc., microporous aeration oxygenation has significant advantages in terms of oxygenation efficiency and energy consumption. Specifically:
1. Higher oxygenation efficiency: The ammonia nitrogen and nitrite in the water treated with microporous aeration are lower than traditional oxygenation methods, and the oxygenation rate is faster.
2. Lower energy consumption: The energy consumption of microporous aerators is less than a quarter of that of traditional aerators, which can greatly save the cost of electricity (diesel).
4、 Actual application effect
Micro porous aeration technology has been widely used in aquaculture, sewage treatment, landscape water treatment and other fields. In practical applications, this technology has shown significant oxygenation effects, increasing the survival rate and yield of aquatic organisms, while also improving water quality and environment.
In summary, the oxygenation effect of microporous aeration tubes is significant, with advantages such as three-dimensional and energy-saving. Therefore, in situations where oxygenation is required, microporous aeration tubes are a recommended choice.
