Comparison Table of Belt Models for Roots Blowers
introduction
The belt of Roots blower is a key component in its transmission system, and selecting the appropriate belt model is crucial for the normal operation of the blower. Different models of Roots blowers require different specifications of belts, so it is necessary to understand the comparison table of Roots blower belt models. This article will provide a detailed introduction to the models of Roots blower belts and their corresponding fan models, helping users choose and use belts correctly.
1. Basic parameters of the belt
The basic parameters of the Roots blower belt include length, width, thickness, and material. Common belt materials include rubber, polyurethane, etc. Different materials of belts have different wear resistance and temperature resistance. The length and width of the belt determine its matching degree with the pulley, while the thickness affects the transmission efficiency and service life of the belt.
2. Comparison table of common Roots blower belt models
Here is a comparison table of some common Roots blower belt models for users' reference:
|Fan model | Belt model | Belt length (mm) | Belt width (mm) | Belt thickness (mm)|
|----------|----------|----------------|----------------|----------------|
| 50 | A50 | 1200 | 13 | 8 |
| 80 | A80 | 1500 | 16 | 10 |
| 100 | A100 | 1800 | 20 | 12 |
| 125 | A125 | 2000 | 22 | 14 |
| 150 | A150 | 2200 | 25 | 16 |
3. How to choose the appropriate belt
**Matching fan model * *: Firstly, users should select the corresponding belt model based on the fan model. Different models of fans have different requirements for the length, width, and thickness of the belt. Choosing an inappropriate belt can lead to a decrease in transmission efficiency or even damage to the fan.
**Considering the working environment: If the fan operates in high temperature, high humidity, or corrosive environments, users should choose belt materials that are resistant to high temperature and corrosion, such as polyurethane belts.
**Regular inspection and replacement: The belt will gradually wear out during use, and users should regularly check the wear of the belt and replace severely worn belts in a timely manner to avoid unstable operation or malfunction of the fan.
4. Installation and maintenance of belts
**Installation tip * *: When installing the belt, ensure that the belt matches the pulley well and avoid being too tight or too loose. Tight belts can increase the load on the motor, while loose belts can cause slippage and affect transmission efficiency.
**Maintenance: Regularly clean the belt and pulley to prevent dust and oil accumulation. For fans that have not been used for a long time, the belt should be loosened to avoid aging due to prolonged stretching.
5. Conclusion
The correct selection and use of Roots blower belts are crucial for the normal operation of the fan. Users should choose the appropriate belt model based on the fan model and working environment, and regularly inspect and maintain the belt to ensure the long-term stable operation of the fan.
