List of parameters for 50 type Roots blower
introduction
Roots blower, as a type of gas conveying equipment, is widely used in fields such as sewage treatment, pneumatic conveying, and aquaculture. The 50 type Roots blower is one of the common models, favored by users due to its moderate air volume and pressure range. This article will provide a detailed list of parameters for the 50 type Roots blower, helping users understand its performance characteristics for better selection and use.
1. Basic parameters of 50 type Roots blower
The basic parameters of the 50 type Roots blower include air volume, pressure, power, speed, etc. The following is a typical parameter list of the 50 type Roots blower:
|Parameter Name | Parameter Value|
|----------------|----------------------|
|Model | 50|
|Airflow range | 0.5-5 m3/min|
|Pressure range | 9.8-58.8 kPa|
|Motor power | 0.75-5.5 kW|
|Speed | 1450-2900 rpm|
|Noise level | ≤ 75 dB (A)|
|Import and export caliber | DN50|
|Weight | 50-70 kg|
|Material | Cast Iron/Stainless Steel|
2. Detailed explanation of parameters
**The air volume range of the 50 type Roots blower is 0.5-5 m3/min, suitable for small and medium-sized gas transportation scenarios. Users can choose the appropriate air volume according to their actual needs.
**Pressure range * *: The pressure range is 9.8-58.8 kPa, which can meet the needs of most low-pressure gas transportation. For scenarios that require higher pressure, higher models of Roots blowers can be chosen.
**Motor power * *: The motor power range is 0.75-5.5 kW, and users can choose the appropriate motor power according to their air volume and pressure requirements. The higher the power, the stronger the air volume and pressure capacity of the fan.
**Speed * *: The speed range is 1450-2900 rpm. The higher the speed, the greater the air volume of the fan, but the noise and wear will also increase accordingly.
**Noise level * *: The noise level of a 50 type Roots blower usually does not exceed 75 dB (A), making it suitable for scenarios with low noise requirements. If you have high requirements for noise, you can choose low-noise models or install mufflers.
**Import and export diameter * *: The import and export diameter is DN50, and users need to choose the appropriate interface according to the pipeline size.
**Weight and Material: The weight of the 50 type Roots blower is between 50-70 kg, and the material is usually cast iron or stainless steel, which has good corrosion resistance and durability.
3. Application scenarios
The 50 type Roots blower is suitable for the following scenarios:
-Wastewater treatment: Used for oxygen transport in aeration tanks to improve wastewater treatment efficiency.
-Pneumatic conveying: used for conveying powdered or granular materials, such as cement, grains, etc.
-Aquaculture: Used for oxygenation of fish ponds to improve the yield and quality of aquaculture.
-Vacuum packaging: Vacuum packaging equipment used in industries such as food and medicine.
4. Selection suggestions
When selecting the 50 type Roots blower, users should determine the air volume and pressure range according to their actual needs, and choose the appropriate motor power and speed. At the same time, factors such as the noise level, material, and weight of the fan need to be considered to ensure that the fan can meet usage requirements and have a longer service life.
5. Conclusion
The 50 type Roots blower is widely used in multiple fields due to its moderate air volume and pressure range. By understanding its parameter list, users can better select and use the 50 type Roots blower, ensuring its performance in practical applications.
