Correct standard and maintenance guide for oil level of Roots blower
The oil level standard of Roots blower is one of the key factors to ensure its stable operation. The following is a detailed explanation of the oil level standard for Roots blowers:
1、 Oil level standard range
The oil level of Roots blowers usually needs to be within a specific standard range to ensure their normal operation. Specifically, the oil level standard is usually located around half of the oil window marking line, and the normal range is generally between 2/3 and 1/3 of the oil window marking line. This range ensures that the lubricating oil can fully lubricate all components of the Roots blower during operation, while avoiding problems such as oil temperature rise and oil overflow caused by high oil level.
There is also a saying that when the fan stops running, the oil level should be at the red dot in the center of the oil window. If the oil window cannot be seen clearly, it needs to be replaced in a timely manner to ensure accurate observation of the oil level.
2、 Method for measuring oil level
1. When measuring the oil level of the Roots blower lubricating oil, it should be done at normal temperature.
2. Turn off the Roots blower and wait for a period of time (usually around 10 minutes) to ensure that the oil flows back fully and stabilizes.
3. Open the oil window and observe if the oil level is within the standard range.
4. If the oil level is found to be below the standard range, lubricating oil should be replenished in a timely manner to avoid equipment damage caused by lack of oil.
3、 Precautions
1. The selection of lubricating oil should be based on factors such as the model of the Roots blower, working environment, and seasonal temperature. Different models of Roots blowers may have different requirements for lubricating oil, so it is important to carefully read the equipment manual before use.
2. Replacement of lubricating oil: Regular replacement of lubricating oil is an important measure to maintain the good operating condition of Roots blower. When replacing lubricating oil, ensure that the new oil is of the same model as the old oil, and avoid mixing different types of lubricating oil.
3. Regular oil level inspection: The oil level of the Roots blower should be checked regularly to ensure that it remains within the standard range at all times. At the same time, it is also necessary to check whether the oil window is clear and whether the lubricating oil has deteriorated.
In summary, the oil level standard of Roots blower is crucial for its stable operation. During use, the oil level should be strictly adjusted and controlled according to the standard range, and the correct measurement methods and precautions should be followed to ensure the long-term stable operation of the Roots blower.
