What oil is used for Roots blower
Roots blowers typically use 220 # heavy-duty gear oil as lubricating oil. Here are some detailed information and precautions about the oil used in Roots blowers:
1、 Selection of lubricating oil for Roots blower
During the operation of Roots blower, its gears, bearings and other components require good lubrication to reduce friction and wear, while ensuring the normal operation of the equipment. Therefore, choosing the appropriate lubricating oil is crucial. 220 # heavy-duty gear oil is widely used as a lubricating oil for Roots blowers due to its excellent lubrication performance, anti-wear performance, and thermal stability.
2、 Replacement and maintenance of lubricating oil
1. Check the oil level: The oil level should be checked daily to ensure that it is in the upper middle position of the oil mirror. If the oil level is found to be below the middle position, lubricating oil should be replenished immediately.
2. Lubricating oil replacement: Lubricating oil needs to be replaced every three months to ensure the normal operation of the equipment. When using a Roots blower, the gear oil should be replaced within one month to ensure the lubrication effect of the equipment.
3. Attention: When replacing lubricating oil, ensure that the new oil is of the same model as the old oil, and avoid mixing different types of lubricating oil. At the same time, the fuel tank and oil passage should be cleaned to ensure that there are no impurities or dirt.
3、 The function of lubricating oil
1. Reduce friction: The presence of a lubricating oil film allows direct contact between metal surfaces, greatly reducing friction and wear.
2. Sealing function: Applying lubricating grease on the sealing packing and shaft seal can effectively seal, preventing liquid leakage and dust intrusion.
3. Cleaning function: In a thin oil lubrication system, lubricating oil can clean friction surfaces, dust, dirt, and scratches.
4、 Precautions
1. Avoid mixing: Different types of lubricants should not be mixed to avoid reducing lubrication effectiveness or causing adverse reactions.
2. Keep clean: When replacing and replenishing lubricating oil, the oil tank and passage should be kept clean to avoid impurities and dirt from entering.
3. Regular inspection: The oil level and quality of the lubricating oil should be checked regularly, and any abnormalities should be dealt with promptly.
In summary, the Roots blower should use 220 # heavy-duty gear oil as the lubricating oil, and replace and maintain it strictly according to regulations to ensure the normal operation of the equipment and extend its service life.
